CALVCH16245MDLREP

CALVCH16245MDLREP
Mfr. #:
CALVCH16245MDLREP
説明:
Bus Transceivers Mil Enhanced 16B Bus Xcvr
ライフサイクル:
メーカー新製品
データシート:
CALVCH16245MDLREP データシート
配達:
DHL FedEx Ups TNT EMS
支払い:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
詳しくは:
CALVCH16245MDLREP 詳しくは CALVCH16245MDLREP Product Details
製品属性
属性値
メーカー:
テキサスインスツルメンツ
製品カテゴリ:
バストランシーバー
JBoss:
Y
ロジックファミリ:
ALVC
入力レベル:
LVTTL
出力レベル:
LVTTL
出力タイプ:
3-State
高レベル出力電流:
- 24 mA
低レベル出力電流:
24 mA
伝播遅延時間:
3 ns
供給電圧-最大:
3.6 V
供給電圧-最小:
1.65 V
最低動作温度:
- 55 C
最高作動温度:
+ 125 C
パッケージ/ケース:
SSOP-48
包装:
リール
関数:
バストランシーバー
高さ:
2.59 mm
長さ:
15.88 mm
回路数:
2
動作温度範囲:
- 55 C to + 125 C
製品:
標準トランシーバー
シリーズ:
SN74ALVCH16245-EP
テクノロジー:
CMOS
幅:
7.49 mm
ブランド:
テキサスインスツルメンツ
取り付けスタイル:
SMD / SMT
チャネル数:
16
供給電流-最大:
40 uA
動作供給電圧:
1.8 V, 2.5 V, 3.3 V
極性:
非反転
製品タイプ:
バストランシーバー
ファクトリーパックの数量:
1000
サブカテゴリ:
ロジックIC
パーツ番号エイリアス:
V62/04763-02XE
単位重量:
0.021175 oz
Tags
CALVCH162, CALVCH, CALV, CAL
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
    L***i
    L***i
    IT

    The device arrived with the small folded heat sink bent. The stress of the journey .. A terminal of the integrated TDA2030 was interrupted, with the soldering iron I reinforced the corners of the terminals, I reinforced because the component did not have adequate support under the heat sink. I proceeded to insert hot glue to block any movement. I suggest injecting silicone glue so as not to accidentally bend the component. I also suggest to the industry that makes themto insert another output signal logic signal "work, pause" to be interfaced with an industrial PLC, it will be very useful! In the model YS-M3 ver.3 is present and is very useful! Operation OK. I leave 5 stars because the device is fine but for the journey that future electronic devices will have to take, they will have to be better protected!

    2019-03-30
    I***v
    I***v
    RU

    Thank you.

    2019-04-01
***as Instruments
Enhanced Product 16-Bit Bus Transceiver With 3-State Outputs 48-SSOP -55 to 125
***ical
Bus XCVR Dual 16-CH 3-ST 48-Pin SSOP T/R
***i-Key
IC TXRX NON-INVERT 3.6V 48SSOP
***
This 16-bit (dual-octal) noninverting bus transceiver is designed for 1.65-V to 3.6-V VCC operation.
***AS INSTRUMENTS INC
The SN74ALVCH16245-EP is designed for asynchronous communication between data buses. The control-function implementation minimizes external timing requirements.
***XS
This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
***AS INSTRUMEN
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
***
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
Logic Solutions
OMO Electronic Logic Solutions offers a full spectrum of logic functions and technologies from the mature to the advanced, including bipolar, BiCMOS, and CMOS. TI's process technologies offer the logic performance and features required for modern logic designs, while maintaining support for more traditional logic products.Learn More
画像 モデル 説明
INA240A2QDRQ1

Mfr.#: INA240A2QDRQ1

OMO.#: OMO-INA240A2QDRQ1

Current Sense Amplifiers WIDE CM BI-DIR CURRENT SHUNT MONITOR
INA240A3QDRQ1

Mfr.#: INA240A3QDRQ1

OMO.#: OMO-INA240A3QDRQ1

Current Sense Amplifiers WIDE CM BI-DIR CURRENT SHUNT MONITOR
INA240A4QDRQ1

Mfr.#: INA240A4QDRQ1

OMO.#: OMO-INA240A4QDRQ1

Current Sense Amplifiers WIDE CM BI-DIR CURRENT SHUNT MONITOR
TCAN1051GVDRQ1

Mfr.#: TCAN1051GVDRQ1

OMO.#: OMO-TCAN1051GVDRQ1

CAN Interface IC AUTOMOTIVE TRANSCEIVER
TCAN1051GVDRQ1

Mfr.#: TCAN1051GVDRQ1

OMO.#: OMO-TCAN1051GVDRQ1-TEXAS-INSTRUMENTS

CAN Interface IC Automotive Fault Protected CAN Transceiver With Flexible Data-Rate 8-SOIC -55 to 125
INA240A2QDRQ1

Mfr.#: INA240A2QDRQ1

OMO.#: OMO-INA240A2QDRQ1-TEXAS-INSTRUMENTS

WIDE CM BI-DIR CURRENT SHUNT MON
INA240A4QDRQ1

Mfr.#: INA240A4QDRQ1

OMO.#: OMO-INA240A4QDRQ1-TEXAS-INSTRUMENTS

WIDE CM BI-DIR CURRENT SHUNT MON
INA240A3QDRQ1

Mfr.#: INA240A3QDRQ1

OMO.#: OMO-INA240A3QDRQ1-TEXAS-INSTRUMENTS

Op Amp Single GP 5.5V Automotive 8-Pin SOIC
TMP451HQDQFTQ1

Mfr.#: TMP451HQDQFTQ1

OMO.#: OMO-TMP451HQDQFTQ1-1190

Remote and Local Temperature Sensor with Offset Correction
TMP451JQDQFTQ1

Mfr.#: TMP451JQDQFTQ1

OMO.#: OMO-TMP451JQDQFTQ1-1190

Remote and Local Temperature Sensor with Offset Correction
可用性
ストック:
992
注文中:
2975
数量を入力してください:
CALVCH16245MDLREPの現在の価格は参考用です。最高の価格をご希望の場合は、お問い合わせまたは直接メールで営業チーム[email protected]までご連絡ください。
参考価格(USD)
単価
小計金額
1
$6.68
$6.68
10
$6.04
$60.40
25
$5.59
$139.75
100
$5.00
$500.00
250
$4.74
$1 185.00
500
$4.35
$2 175.00
皮切りに
最新の製品
  • bq25700A Battery Buck-Boost Charge Controller
    OMO Electronic offers the bq25700A SMBus multi-chemistry battery buck-boost charge controller with system power monitor and processor hot monitor.
  • Compare CALVCH16245MDLREP
    CALVCH16245IDLEP vs CALVCH16245IDLREP vs CALVCH16245MDLREP
  • TMUX1208 Analog Multiplexer (Mux)
    OMO Electronic' TMUX1208 general purpose analog mux reduces system complexity and board size in a wide variety of applications including building automation.
  • TPD3S014/44 Current Limit Switch
    OMO Electronic' TPD3S014/44’s are integrated devices that feature a current limited load switch and a two channel Transient Voltage Suppressor (TVS).
  • OPA388 Operational Amplifier
    OMO Electronic' OPA388 precision op-amp provides rail-to-rail input output operation in a low-noise, zero-drift, zero-crossover device.
  • TLV9052 RRIO Op-Amp
    OMO Electronic' TLV9052 5 MHz, low-power, RRIO op-amp offers an ultra-high slew rate and low supply current per channel providing excellent AC performance.
Top