TEIK002

Mfr. #:: TEIK002
メーカー:: Microchip Technology
説明:: FLYPORT PICUS STARTER KIT
ライフサイクル:: メーカー新製品
データシート:: TEIK002 データシート
配達:: DHL FedEx Ups TNT EMS
支払い:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:

製品属性
属性値

Tags: TEIK, TEI

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

TEIK002 説明

***ment14 APAC: Flyport Picus Starter Kit, Wireless Conn; Flyport Picus Starter Kit, Wireless Connectivity

***rochip: Flyport Wi-Fi openPICUS Starter Kit (PCB antenna)

***ical: MRF24WBOMA/RM RF Transceiver Starter Kit

***ure Electronics: AT86RF233 802.15.4 LR-WPAN Xplained Pro Extension Board

***ical: EXTENSION BOARD IS TARGETED FOR EVALUATING THE FEATURES OF THE ATMEL AT86RF233 RADIO TRANSCEIVER

***p One Stop: AT86RF233 ZigBee and 802.15.4 Evaluation Board

***ark: EXTENSION BOARD, AT86RF233 RADIO TX & RX

***log Devices: 2200 MHz To 2700 MHz Balanced Mixer, LO Buffer, IF Amplifier, and RF Balun

***ical: ADL5353 Up-Down Converter and Mixer Evaluation Board

***icontronic: Telecom Circuit, 1-Func, BICMOS

***hardson RFPD: FREQUENCY CONTROL EVALUATION BOARD

***ark: ADL5353 EVALUATION BOARD, EB/PCB

***et: Evaluation Board For 1200 MHz To 2500 MHz Balanced Mixer, LO Buffer And RF Balun

***icontronic: Double Balanced Mixer, 1200MHz Min, 2500MHz Max, 8.4dB Conversion Loss-Max, BICMOS

***ical: ADL5365 Up-Down Converter and Mixer Evaluation Board

***log Devices: The ADL5365 uses a highly linear, doubly balanced passive mixer core along with integrated RF and LO balancing circuitry to allow for single-ended operation. The ADL5365 incorporates an RF balun, allowing for optimal performance over a 1200 MHz to 2500 MHz RF input frequency range using low-side LO injection for RF frequencies from 1700 MHz to 2500 MHz and high-side injection for frequencies from 1200 MHz to 1700 MHz. The balanced passive mixer arrangement provides good LO to RF leakage, typically better than −30 dBm, and excellent intermodulation performance. The balanced mixer core also provides extremely high input linearity, allowing the device to be used in demanding cellular applications where in-band blocking signals may otherwise result in the degradation of dynamic performance. The ADL5365 provides two switched LO paths that can be used in test driven development (TDD) applications where it is desirable to rapidly switch between two local oscillators. LO current can be externally set using a resistor to minimize dc current commensurate with the desired level of performance. For low voltage applications, the ADL5365 is capable of operation at voltages down to 3.3 V with substantially reduced current. Under low voltage operation, an additional logic pin is provided to power down (<200 µA) the circuit when desired. The ADL5365 is fabricated using a BiCMOS high performance IC process. The device is available in a 5 mm × 5 mm, 20-lead LFCSP, and operates over a −40°C to +85°C temperature range. An evaluation board is also available. Applications Cellular base station receivers Transmit observation receivers Radio link downconverters

***ow.cn: ADF7242 RF Transceiver Evaluation Board

***log Devices: 2.4-2.48GHz PMOD compatible Tr

***log Devices: The ADF7242 is a highly integrated, low power, and high performance transceiver for operation in the global 2.4 GHz ISM band. It is designed with emphasis on flexibility, robustness, ease of use, and low current consumption. The IC supports the IEEE 802.15.4-2006 2.4 GHz PHY requirements as well as proprietary GFSK/ FSK/GMSK/MSK modulation schemes in both packet and data streaming modes. With a minimum number of external components, it achieves compliance with the FCC CFR47 Part 15, ETSI EN 300 440 (Equipment Class 2), ETSI EN 300 328 (FHSS, DR > 250 kbps), and ARIB STD T-66 standards. The ADF7242 complies with the IEEE 802.15.4-2006 2.4 GHz PHY requirements with a fixed data rate of 250 kbps and DSSS-OQPSK modulation. With its support of GFSK/FSK/GMSK/MSK modulation schemes, the IC can operate over a wide range of data rates from 50 kbps to 2 Mbps and is, therefore, equally suitable for proprietary applications in the areas of smart metering, industrial control, home and building automation, and consumer electronics. In addition, the agile frequency synthesizer of the ADF7242, together with short turnaround times, facilitates the implementation of FHSS systems. The transmitter path of the ADF7242 is based on a direct closed-loop VCO modulation scheme using a low noise fractional-N RF frequency synthesizer. The automatically calibrated VCO operates at twice the fundamental frequency to reduce spurious emissions and avoid PA pulling effects. The bandwidth of the RF frequency synthesizer is automatically optimized for transmit and receive operations to achieve optimum phase noise, modulation quality, and synthesizer settling time performance. The transmitter output power is programmable from −20 dBm to +4 dBm with automatic PA ramping to meet transient spurious specifications. An integrated biasing and control circuit is available in the IC to significantly simplify the interface to external PAs. The receive path is based on a zero-IF architecture enabling very high blocking resilience and selectivity performance, which are critical performance metrics in interference dominated environments such as the 2.4 GHz band. In addition, the architecture does not suffer from any degradation of blocker rejection in the image channel, which is typically found in low IF receivers. In GFSK/FSK modes, the receiver features a high speed automatic frequency control (AFC) loop, which allows the frequency synthesizer to find and correct any frequency errors in the received packet. The IC can operate with a supply voltage between 1.8 V and 3.6 V with very low power consumption in receive and transmit modes while maintaining its excellent RF performance, making it especially suitable for battery-powered systems. The ADF7242 features a flexible dual-port RF interface that can be used with an external LNA and/or PA in addition to supporting switched antenna diversity. The ADF7242 incorporates a very low power custom 8-bit processor that supports a number of transceiver management functions. These functions are handled by the two main modules of the processor; the radio controller and the packet manager. See data sheet for additional information. Applications Wireless sensor networks Automatic meter reading/Smart metering Industrial wireless control Healthcare Wireless audio / video Consumer electronics Zigbee

Market price

モデル	メーカー	説明	ストック	価格
TEIK002 DISTI # TEIK002-ND	Microchip Technology Inc	FLYPORT PICUS STARTER KIT RoHS: Compliant Min Qty: 2 Container: Box	Limited Supply - Call
TEIK002 DISTI # 30T5505	Microchip Technology Inc	Flyport Wi-Fi openPICUS Starter Kit (PCB antenna), Wireless Connectivity	0
TEIK002 DISTI # 579-TEIK002	Microchip Technology Inc	Ethernet Development Tools Flyport Picus Starter Kit	0	1:$89.0000

画像	モデル	説明
	Mfr.#: TEI-003 OMO.#: OMO-TEI-003-1190	ブランドニューオリジナル
	Mfr.#: TEI-220 OMO.#: OMO-TEI-220-1190	ブランドニューオリジナル
	Mfr.#: TEI14949 OMO.#: OMO-TEI14949-1190	NOT A VALID PART NUMBER
	Mfr.#: TEI14949J12-2 OMO.#: OMO-TEI14949J12-2-1190	ブランドニューオリジナル
	Mfr.#: TEI14949PL50-2 OMO.#: OMO-TEI14949PL50-2-1190	ブランドニューオリジナル
	Mfr.#: TEI9401 OMO.#: OMO-TEI9401-1190	ブランドニューオリジナル
	Mfr.#: TEIDENE 9880 OMO.#: OMO-TEIDENE-9880-1190	ブランドニューオリジナル
	Mfr.#: TEILE-NR. 158960 OMO.#: OMO-TEILE-NR-158960-1190	ブランドニューオリジナル
	Mfr.#: TEISP1009-05 OMO.#: OMO-TEISP1009-05-1190	ブランドニューオリジナル
	Mfr.#: TEISP1050-01 OMO.#: OMO-TEISP1050-01-1190	ブランドニューオリジナル

TEIK002

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes