LMC6001A MDC

LMC6001A MDC Overview

This product is manufactured by Texas Instruments. Supply Voltage - Max: 15.5 V This product is equipped with 1 Channel for efficient performance. This product has a 66 dB to 83 dB of 50 dB, ensuring reliable signal acquisition. This product has an 25 fA of 5 uA for precise signal processing. Supply Voltage - Min: 4.5 V The minimum operating temperature of this product is - 40 C. The product can operate at a maximum temperature of + 85 C. This product does not have a No Shutdown feature, ensuring continuous operation. The amplifier type is General Purpose Amplifier. Rail-to-Rail input type The output type is Rail-to-Rail. Supply Type: Single This device belongs to the General Purpose Amplifiers type. Texas Instruments is a trusted brand for quality electronics The 0.00013 pA/sqrt Hz is 0.7 pA/rtHz. 5 V, 9 V, 12 V, 15 V operating supply voltage range Op Amps - Operational Amplifiers product type This product has a 73 dB of 50 dB, providing reliable power supply noise rejection. 270 of 100 Amplifier ICs as subcategory

LMC6001A MDC Image

LMC6001A MDC Specifications

• Manufacturer: Texas Instruments
• Product Category: Operational Amplifiers - Op Amps
• RoHS: Y
• Supply Voltage - Max: 15.5 V
• Number of Channels: 1 Channel
• GBP - Gain Bandwidth Product: 1.3 MHz
• SR - Slew Rate: 1.5 V/us
• CMRR - Common Mode Rejection Ratio: 66 dB to 83 dB
• Ib - Input Bias Current: 25 fA
• Vos - Input Offset Voltage: 0.35 mV
• Supply Voltage - Min: 4.5 V
• Operating Supply Current: 450 uA
• Minimum Operating Temperature: - 40 C
• Maximum Operating Temperature: + 85 C
• Shutdown: No Shutdown
• Series: LMC6001
• Amplifier Type: General Purpose Amplifier
• Input Type: Rail-to-Rail
• Output Type: Rail-to-Rail
• Supply Type: Single
• Type: General Purpose Amplifiers
• Brand: Texas Instruments
• en - Input Voltage Noise Density: 22 nV/sqrt Hz
• In - Input Noise Current Density: 0.00013 pA/sqrt Hz
• Operating Supply Voltage: 5 V, 9 V, 12 V, 15 V
• Product Type: Op Amps - Operational Amplifiers
• PSRR - Power Supply Rejection Ratio: 73 dB
• Factory Pack Quantity: 270
• Subcategory: Amplifier ICs
• Voltage Gain dB: 122.92 dB

LMC6001A MDC FAQ

• A: What is the Manufacturer of the product?

  Q: The Manufacturer of the product is Texas Instruments.

• A: What is the Supply Voltage - Max of the product?

  Q: The Supply Voltage - Max of the product is 15.5 V.

• A: Is the cutoff frequency of the product Number of Channels?

  Q: Yes, the product's Number of Channels is indeed 1 Channel

• A: At what frequency does the CMRR - Common Mode Rejection Ratio?

  Q: The product CMRR - Common Mode Rejection Ratio is 66 dB to 83 dB.

• A: What is the Ib - Input Bias Current of the product?

  Q: The Ib - Input Bias Current of the product is 25 fA.

• A: Is the cutoff frequency of the product Supply Voltage - Min?

  Q: Yes, the product's Supply Voltage - Min is indeed 4.5 V

• A: Is the cutoff frequency of the product Minimum Operating Temperature?

  Q: Yes, the product's Minimum Operating Temperature is indeed - 40 C

• A: Is the cutoff frequency of the product Maximum Operating Temperature?

  Q: Yes, the product's Maximum Operating Temperature is indeed + 85 C

• A: Is the cutoff frequency of the product Shutdown?

  Q: Yes, the product's Shutdown is indeed No Shutdown

• A: What is the Amplifier Type of the product?

  Q: The Amplifier Type of the product is General Purpose Amplifier.

• A: Is the cutoff frequency of the product Input Type?

  Q: Yes, the product's Input Type is indeed Rail-to-Rail

• A: Is the cutoff frequency of the product Output Type?

  Q: Yes, the product's Output Type is indeed Rail-to-Rail

• A: Is the cutoff frequency of the product Supply Type?

  Q: Yes, the product's Supply Type is indeed Single

• A: What is the Type of the product?

  Q: The Type of the product is General Purpose Amplifiers.

• A: Is the cutoff frequency of the product Brand?

  Q: Yes, the product's Brand is indeed Texas Instruments

• A: What is the In - Input Noise Current Density of the product?

  Q: The In - Input Noise Current Density of the product is 0.00013 pA/sqrt Hz.

• A: At what frequency does the Operating Supply Voltage?

  Q: The product Operating Supply Voltage is 5 V, 9 V, 12 V, 15 V.

• A: At what frequency does the Product Type?

  Q: The product Product Type is Op Amps - Operational Amplifiers.

• A: What is the PSRR - Power Supply Rejection Ratio of the product?

  Q: The PSRR - Power Supply Rejection Ratio of the product is 73 dB.

• A: What is the Factory Pack Quantity of the product?

  Q: The Factory Pack Quantity of the product is 270.

• A: Is the cutoff frequency of the product Subcategory?

  Q: Yes, the product's Subcategory is indeed Amplifier ICs