CLVTH16652IDGGREP

CLVTH16652IDGGREP
Mfr. #:
CLVTH16652IDGGREP
説明:
Bus Transceivers Mil Enhance 3.3V ABT 16B Bus Xcvrs & Reg
ライフサイクル:
メーカー新製品
データシート:
CLVTH16652IDGGREP データシート
配達:
DHL FedEx Ups TNT EMS
支払い:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
詳しくは:
CLVTH16652IDGGREP 詳しくは CLVTH16652IDGGREP Product Details
製品属性
属性値
メーカー:
テキサスインスツルメンツ
製品カテゴリ:
バストランシーバー
JBoss:
Y
ロジックファミリ:
16
入力レベル:
LVTTL
出力レベル:
LVTTL
出力タイプ:
3-State
高レベル出力電流:
- 32 mA
低レベル出力電流:
64 mA
伝播遅延時間:
2.8 ns
供給電圧-最大:
3.6 V
供給電圧-最小:
2.7 V
最低動作温度:
- 40 C
最高作動温度:
+ 85 C
パッケージ/ケース:
TSSOP-56
包装:
リール
関数:
バストランシーバー/レジスター
高さ:
1.15 mm
長さ:
14 mm
回路数:
2
動作温度範囲:
- 40 C to + 85 C
製品:
BiCMOS
シリーズ:
SN74LVTH16652-EP
テクノロジー:
BiCMOS
幅:
6.1 mm
ブランド:
テキサスインスツルメンツ
取り付けスタイル:
SMD / SMT
チャネル数:
16
供給電流-最大:
5 mA
動作供給電圧:
2.7 V to 3.6 V
極性:
非反転
製品タイプ:
バストランシーバー
ファクトリーパックの数量:
2000
サブカテゴリ:
ロジックIC
トリガータイプ:
ポジティブエッジ
パーツ番号エイリアス:
V62/04717-01XE
単位重量:
0.008917 oz
Tags
CLVTH1, CLVTH, CLVT, CLV
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***as Instruments
Enhanced Product 3.3 V Abt 16-Bit Bus Transceivers And Registers With 3-State Outputs 56-TSSOP -40 to 85
***et
Bus XCVR Dual 16-CH 3-ST 56-Pin TSSOP T/R
***i-Key
IC TXRX NON-INVERT 3.6V 56TSSOP
***ark
Transceiver Logic IC; Logic Family:LVT; Supply Voltage Min:2.7V; Supply Voltage Max:3.6V; Package/Case:56-TSSOP; No. of Pins:56; Operating Temperature Range:-40°C to +85°C; Leaded Process Compatible:Yes; No. of Bits:16 ;RoHS Compliant: Yes
***AS INSTRU
The SN74LVTH16652 is a 16-bit bus transceiver designed for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. These devices can be used as two 8-bit transceivers or one 16-bit transceiver.
***AS INSTR
Output-enable (OEAB and OEBA\) inputs are provided to control the transceiver functions. Select-control (SAB and SBA) inputs are provided to select whether real-time or stored data is transferred. A low input level selects real-time data, and a high input level selects stored data. The circuitry used for select control eliminates the typical decoding glitch that occurs in a multiplexer during the transition between stored and real-time data. Figure 1 illustrates the four fundamental bus-management functions that can be performed with the SN74LVTH16652.
***ASI
Data on the A or B bus, or both, can be stored in the internal D flip-flops by low-to-high transitions at the appropriate clock (CLKAB or CLKBA) inputs, regardless of the levels on the select-control or output-enable inputs. When SAB and SBA are in the real-time transfer mode, it also is possible to store data without using the internal D-type flip-flops by simultaneously enabling OEAB and OEBA\. In this configuration, each output reinforces its input. When all other data sources to the two sets of bus lines are at high impedance, each set of bus lines remains at its last level configuration.
***as Instr.
When VCC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE\ should be tied to VCC through a pullup resistor, and OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sinking/current-sourcing capability of the driver.
***AS INSTR
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
***AS INSTUMENTS
This device is fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
Logic Solutions
OMO Electronic Logic Solutions offers a full spectrum of logic functions and technologies from the mature to the advanced, including bipolar, BiCMOS, and CMOS. TI's process technologies offer the logic performance and features required for modern logic designs, while maintaining support for more traditional logic products.Learn More
画像 モデル 説明
CLVTH16652IDGGREP

Mfr.#: CLVTH16652IDGGREP

OMO.#: OMO-CLVTH16652IDGGREP

Bus Transceivers Mil Enhance 3.3V ABT 16B Bus Xcvrs & Reg
CLVTH16652IDGGREP

Mfr.#: CLVTH16652IDGGREP

OMO.#: OMO-CLVTH16652IDGGREP-TEXAS-INSTRUMENTS

ブランドニューオリジナル
CLVTH16646IDGGREP

Mfr.#: CLVTH16646IDGGREP

OMO.#: OMO-CLVTH16646IDGGREP-TEXAS-INSTRUMENTS

ブランドニューオリジナル
可用性
ストック:
Available
注文中:
3500
数量を入力してください:
CLVTH16652IDGGREPの現在の価格は参考用です。最高の価格をご希望の場合は、お問い合わせまたは直接メールで営業チーム[email protected]までご連絡ください。
皮切りに
最新の製品
  • bq25700A Battery Buck-Boost Charge Controller
    OMO Electronic offers the bq25700A SMBus multi-chemistry battery buck-boost charge controller with system power monitor and processor hot monitor.
  • TMUX1208 Analog Multiplexer (Mux)
    OMO Electronic' TMUX1208 general purpose analog mux reduces system complexity and board size in a wide variety of applications including building automation.
  • Compare CLVTH16652IDGGREP
    CLVTH162240IDGGREP vs CLVTH162244IDGGREP vs CLVTH162245IDGGREP
  • TPD3S014/44 Current Limit Switch
    OMO Electronic' TPD3S014/44’s are integrated devices that feature a current limited load switch and a two channel Transient Voltage Suppressor (TVS).
  • OPA388 Operational Amplifier
    OMO Electronic' OPA388 precision op-amp provides rail-to-rail input output operation in a low-noise, zero-drift, zero-crossover device.
  • TLV9052 RRIO Op-Amp
    OMO Electronic' TLV9052 5 MHz, low-power, RRIO op-amp offers an ultra-high slew rate and low supply current per channel providing excellent AC performance.
Top