AVX's F72 solid tantalum electrolytic capacitors and F75 series maximum CV solid tantalum electrolytic capacitors are conformal coated chip capacitors.
By AVX Corporation 955
AVX’s TACmicrochip® standard and low-profile tantalum microchip capacitors offer high energy storage in a small case size down to 0402.
By AVX Corporation 775
KEMET's polyethylene naphthalate film capacitor for surface mounting boasts wide VDC/VAC ratings and high temperature service and meets AEC-200 requirements.
By KEMET 1451
AVX’s T4Z series HRC4000 medical grade solid tantalum capacitors are designed for use in non-critical medical applications.
By AVX Corporation 903
AVX’s F93 and F93-AJ6 series are resin-molded chips that come in four different case sizes (A, B, C, and N).
By AVX Corporation 938
Eaton XT series supercapacitors are unique, ultra-high capacitance devices utilizing electrochemical double layer capacitor (EDLC) construction.
By Eaton-Electronics Division 1057
Littelfuse’s LPWI series thin film power inductors offer compact, low-profile dimensions with low losses and high efficiency for power applications.
By Littelfuse Inc 1252
The Bourns® SRN5020TA/SRN5040TA inductors are suited for DC/DC converters and power supplies where higher inductor reliability may be required.
By Bourns Inc. 921
WIMA's SMD-PPS film capacitors with capacitances from 0.01 mF to 2.2 mF are produced with the proven box technology.
By WIMA 2227
KEMET's TPI series ferrite core inductors flat wire, one-turn through the construction design enables high efficiency at large currents.
By KEMET 1399
Vishay BC Components' 715 series capacitors are specifically designed to function in circuits with high peak current and high repetition rates.
By Vishay/BCcomponents 1318
Panasonic’s EEU-FP series capacitors are capable of up to 2.5 times the ripple current and 60% larger capacitance than existing similar case size capacitors.
By Panasonic 1186
WIMA SMD series is produced with the proven box technology and covers almost the entire application range of conventional through-hole plastic film capacitors.
By WIMA 2003
KEMET's KONNEKT™ U2J MLCC is a surface mountable, leadless, multi-chip solution suitable for high-efficiency and high-density power applications.
By KEMET 1412
Wurth Electronics’ WCAP-CSST soft termination MLCC capacitors have resistant and robust performance during PCB handling.
By Würth Elektronik 794
Wurth Electronics’ WCAP-CSRF radio frequency MLCCs are NP0 Class I MLCCs for high frequency and antenna matching.
By Würth Elektronik 916
Panasonic's EEH-ZS series surface mount conductive polymer hybrid aluminum capacitors are capable of operating at high temperatures.
By Panasonic 1204
TDK's VLS-EX-H series power inductors are magnetically-shielded wirewound inductors with a ferrite core, designed for use in automotive applications.
By TDK Corporation 840
TDK's SPM-VT-D series wire wound inductors were designed and optimized for use in automotive applications.
By TDK Corporation 826
The RLS series ranges in size from 3.9 µH to 100 µH and has been tested and approved to work specifically with RECOM DC/DC modules.
By RECOM Power 1369