Cinch Connectivity Solutions' high frequency SMA end launch connectors for microwave PC board substrates.
By Cinch Connectivity Solutions Johnson 1639
Amphenol RF offers its SMPM series connectors which feature a small package size and 8.65 mm, board-to-board minimum spacing.
By Amphenol RF Division 1366
Amphenol RF offers its 4.3/10 adapters as an addition to the low-PIM adapter family and is for space-restricted, high-density, and weight-sensitive applications.
By Amphenol RF Division 1408
Molex's micro IDT coaxial connector system provides superior signal integrity, space savings and reliability for mobile and other applications.
By Molex Inc 871
Switchcraft/Conxall’s Mini-Con-X sealed connectors offer up to 10 contacts in a compact, 0.71” connector.
By Conxall/Switchcraft 1946
DeviceNet Solutions are designed to be low-cost, real-time, device-level bus architecture that connects sensors and actuators. Wiring and installation of automation devices is greatly simplified w
By Molex Inc 2066
TE Connectivity AMP's CoolSplice connectors elegantly combine reliability with ease of termination.
By TE Connectivity AMP Connectors 957
Camera Link® applications will be able to take advantage of the line of shrunk delta ribbon (SDR) connectors and cable assemblies 0.8 mm from 3M™.
By 3M 1445
With the matched impedance splice, TE Connectivity (TE) solves the problem of costly removal and replacement of damaged RG-393 coaxial cable.
By TE Connectivity Aerospace, Defense and Marine 1381
Switchcraft’s Dura-Pull series offers up to nine contacts in a durable metal connector only 1/2" in diameter.
By Switchcraft, Inc. 2591
TE Connectivity AMP's push grip wire connectors are insulated splice connectors for electrical installations that are color-coded for easy identification.
By TE Connectivity AMP Connectors 799
Molex's 4.3-10 RF connectors provide best-in-class passive intermodulation (PIM), less torque than current interfaces, and design flexibility with three mating options for right-angle and vert
By Molex Inc 1103
Panduit provides an extensive line of tolling designed specifically to provide optimum performance.
By Panduit Corp 1547
Mill-Max has developed its triple row connector series’ to include long stroke, through-hole-mount spring-loaded pins, and mating target connectors.
By Mill-Max Manufacturing Corp. 893
Mill-Max has expanded its selection of wire termination products with the addition of wire crimp and solder cup receptacles.
By Mill-Max Manufacturing Corp. 1569
Mill-Max has developed these low-profile SMT disc shaped terminals that are perfect for applications where vertical space is at a premium.
By Mill-Max Manufacturing Corp. 1305
Mill-Max has developed an addition to its spring-loaded pin selection with the introduction of the 0919-0-15-20-89-14-11-0. This offers a maximum stroke of 3 mm (0.118”) with an initial height of
By Mill-Max Manufacturing Corp. 1777
TE Connectivity DEUTSCH's DT connectors are designed for cable-to-cable and cable-to-board harsh environment applications.
By TE Connectivity DEUTSCH INDUSTRIAL & COMMERCIAL TRANSPORTATION 2816
General Cable's alarm, security, and sound multi-conductor cables are designed for power-limited control circuits as well as wiring of the following systems: intercom, security, and audio appl
By General Cable/Carol Brand 1206
CONEC has extended its range of IP67 connectors with bayonet locking by a new power connector variant in addition to data and bus connectors.
By CONEC 2113