Stackpole’s CSRF0xxx series of foil-on-ceramic current-sensing resistors that are ideal for portable power and battery management applications.
By Stackpole Electronics, Inc. 698
TDK's EPCOS ERU16 series SMT power inductors are energy storage chokes for DC-DC converters, VRM modules, POL converters, and solar converters.
By EPCOS 1024
Stackpole's SM series surface-mount wirewound resistors are designed to fit into several applications where a higher power rating in a smaller package is needed.
By Stackpole Electronics, Inc. 720
Stackpole's 1% and 5% tolerance thick film engineering kits are a great solution for engineers to use with prototyping during the development cycle.
By Stackpole Electronics, Inc. 776
Stackpole introduces their ultra-precision current-sensing resistors constructed of all metal, allowing it to operate in high temperatures and withstand thermal stresses.
By Stackpole Electronics, Inc. 798
WE-XHMI: SMD power inductor from Wurth - Flat wire coil for low copper losses, compact design, high saturation currents, and magnetically shielded.
By Würth Elektronik 675
Vishay’s HOTcap® series of radial leaded multilayer ceramic capacitors is the first to feature a maximum operating temperature of +175°C for automotive applications.
By Vishay/BCcomponents 1485
TDK’s CLF-NI-D series power inductors are magnetically shielded, wire wound inductors with a magnetic ferrite core, designed for use in automotive applications.
By TDK Corporation 1622
Multilayer ceramic capacitors with silver / palladium terminations, from Knowles Syfer, have often been used in medical applications.
By Syfer 2014
Taitien Electronics, a leading provider of frequency control solutions, has over 40 years of experience in designing and manufacturing high-stability crystal oscillators.
By Taitien 1079
United Chemi-Con's GXF series of aluminum electrolytic capacitors with 3,000 hours operation at 125°C guaranteed with full ripple current applied for all case sizes.
By United Chemi-Con 722
Nidec Copal Electronics' M22L10 wirewound potentiometers have a long life of at least five million rotational cycles.
By Nidec Copal Electronics 1145
Rubycon kits offer engineers a design solution for any of the various applications in which a capacitor can be used.
By Rubycon 669
TDK and EPCOS offer their ultra-robust, industrial-grade X2 capacitors for applications such as X2 class, for interference suppression, and "across the line."
By EPCOS 1065
KEMET's MLCCs feature enhanced internal designs for in-circuit ESD protection and is available in a variety of sizes, lead forms, and lead spacing for a wide array of mounting requirements.
By KEMET 1283
Ohmite's MOX500 series axial thick film resistors meet IEC61000-4-5 surge handling requirements up to 2 KV and are rated at 2 W at 70°C.
By Ohmite 1321
Combining the highest power transfer efficiency (Q) with industry-leading thin design, PowerLife™ coils from Molex support low, high, and properitary frequencies.
By Molex Inc 1059
Wurth Electronics WE-FAMI series is a THT high-current inductor made of coil design material and features high saturation current and low RDC.
By Würth Elektronik 710
Bourns announce the model PVG3 series SMD sealed type single-turn trimming potentiometer which comes in two different pin styles.
By Bourns Inc. 959