CoolPower D-sub connectors feature high current, high performance Amphenol ICC CoolBand contact technology.
By Amphenol Commercial Products 1834
Amphenol RF's HD-BNC is a high-density interconnect standard which satisfies space constraints in next generation system architectures.
By Amphenol RF Division 1680
ExpressPort SFP+ 1xN cages from Amphenol ICC provide data transfer speeds of up to 10 Gbps.
By Amphenol Commercial Products 1782
Amphenol RF's edge-launch connector board is an industry standard, precision machined brass gold plated connector with 500 mating cycles.
By Amphenol RF Division 1746
Amphenol RF coaxial connectors for use in non-magnetic environments are available in SMB, MCX, and MMCX interfaces.
By Amphenol RF Division 2068
Amphenol's 75 Ω 1.0/2.3 DIN plugs offers a full range of 1.0/2.3 DIN plugs designed for 75 Ω broadcast video applications.
By Amphenol RF Division 1845
The APM self-sealing nuts seal to 20,000 psi and fasten where gas or liquids are present or under pressure.
By APM Hexseal 1687
APM Hexseal's push-button boots are molded from a high tear-strength silicone rubber bonded to a built-in mounting nut.
By APM Hexseal 1666
APM Hexseal's E-SEEL® rocker switch boots are molded from RUBRGLAS™ and feature a continuous sealing rib at their base to fully enclose the switch bezel.
By APM Hexseal 1651
APM Hexseal's stainless-steel bushing seal was designed to control potential leakage with its bonded silicone exterior.
By APM Hexseal 1613
APM Hexseal's self-sealing screws are designed to seal to 20,000 psi and are reusable and compatible with all surface finishes.
By APM Hexseal 1810
APM Hexseal's rotary shaft seals for potentiometers feature a molded in mounting-nut and choice of IP66/68 rated models.
By APM Hexseal 1555
APM Hexseal's SEELOC®, high-pressure washers are easy to install and their uniformity and high strength assure repeatable performance.
By APM Hexseal 1720
APM Hexseal's toggle switch boots are molded from a high tear-strength silicone rubber bonded to a built-in mounting nut.
By APM Hexseal 1713
ASSMANN's Cat 5e and Cat 6 tool-free keystone jacks come complete with a snap-tool and zip-tie for secure connection and are available in five colors.
By Assmann WSW Components 1514
Assmann WSW Components' USB 3.0 cables and connectors will multiply the bandwidth tenfold over the USB 2.0 and meets all standards of USB-IF.
By Assmann WSW Components 1880
AVX's 9176 WTB connectors are 26-28 AWG IDC contacts for industrial WTB applications with an industrial -40 - 125°C operating temperature range.
By AVX Corporation 1266
AVX's 9159 interconnect system, designed for the SSL market, allows two PCBs to be mated end-to-end, which creates strips of LED lighting.
By AVX Corporation 1492
Bulgin's 400 series of power connectors, part of the Buccaneer family, are sealed to IP68 when mated and offer 2-12 pole options with a max rating of 8 A, 250 V.
By Bulgin 2365
Conec's Mini-USB 2.0 Type B watertight connectors are integrated into a black plastic housing with a bayonet locking feature.
By CONEC 2259