TDK’s CLF-NI-D series power inductors are magnetically shielded, wire wound inductors with a magnetic ferrite core, designed for use in automotive applications.
By TDK Corporation 1622
Multilayer ceramic capacitors with silver / palladium terminations, from Knowles Syfer, have often been used in medical applications.
By Syfer 2014
Taitien Electronics, a leading provider of frequency control solutions, has over 40 years of experience in designing and manufacturing high-stability crystal oscillators.
By Taitien 1079
United Chemi-Con's GXF series of aluminum electrolytic capacitors with 3,000 hours operation at 125°C guaranteed with full ripple current applied for all case sizes.
By United Chemi-Con 723
Nidec Copal Electronics' M22L10 wirewound potentiometers have a long life of at least five million rotational cycles.
By Nidec Copal Electronics 1145
Rubycon kits offer engineers a design solution for any of the various applications in which a capacitor can be used.
By Rubycon 673
TDK and EPCOS offer their ultra-robust, industrial-grade X2 capacitors for applications such as X2 class, for interference suppression, and "across the line."
By EPCOS 1067
KEMET's MLCCs feature enhanced internal designs for in-circuit ESD protection and is available in a variety of sizes, lead forms, and lead spacing for a wide array of mounting requirements.
By KEMET 1283
Ohmite's MOX500 series axial thick film resistors meet IEC61000-4-5 surge handling requirements up to 2 KV and are rated at 2 W at 70°C.
By Ohmite 1321
Combining the highest power transfer efficiency (Q) with industry-leading thin design, PowerLife™ coils from Molex support low, high, and properitary frequencies.
By Molex Inc 1060
Wurth Electronics WE-FAMI series is a THT high-current inductor made of coil design material and features high saturation current and low RDC.
By Würth Elektronik 712
Bourns announce the model PVG3 series SMD sealed type single-turn trimming potentiometer which comes in two different pin styles.
By Bourns Inc. 961
Murata's power inductor sample kits contain various case-size power inductors and are ideal for power supply circuits. Murata has released eight sample kits and customers can choose their suit
By Murata Electronics 1185
Microchip's DSC6000 family of MEMS oscillators combines the industry leading low power consumption and ultra-small packages with exceptional frequency stability.
By Microchip Technology 2134
The RTAN series from Stackpole is an AEC-Q200 qualified series of precision thin film chip resistors. The tantalum nitride resistive film forms a moisture impervious tantalum pentoxide barrier lay
By Stackpole Electronics, Inc. 856
In contrast to conventional ceramic capacitors, TDK CeraLink capacitors' maximum capacitance at application voltage increases proportionately to the share of the ripple voltage.
By EPCOS 1050
Murata Power Solutions introduces their D series ferrite power inductors that are ideal for DC/DC converter usage such as industrial, test equipment, factory automation, and networking application
By Murata Electronics 752
United Chemi-Con’s multi-layer ceramic capacitors (MLCC’s) are well known for their ultra volumetric efficiency, high ripple current capability, high temperature performance, and extreme reliabili
By United Chemi-Con 1493
United Chemi-Con’s stacked chip multi-layer ceramic capacitors (MLCC’s), NTJ series are well known for their ultra volumetric efficiency, high ripple current capability, high temperature performan
By United Chemi-Con 1022