Murata Power Solutions' 782100 transformer combines with pSemi's (formerly Peregrine Semiconductor) PE22100 push-pull driver to save dev time of power supplies.
By Murata Power Solutions Inc 758
Pulse Electronics Networking's HDBaseT™ industrial transformer and common mode choke for improved EMI performance and power over HDBaseT (PoH) applications.
By Pulse Electronics Network 1079
Pulse Electronics Power's PH9085 series is a line of high-isolation power supply transformers that offer a range of insulation and isolation capabilities.
By Pulse Electronics 1606
TDK’s VGT and VST series SMD transformers were designed for use in lithium-ion battery voltage monitoring systems for electric vehicles.
By TDK Corporation 810
TDK’s VGT series transformers are AEC-Q200 compliant, utilize a high saturation flux density ferrite core, and come in a variety of case sizes.
By TDK Corporation 827
Pulse Electronics Power's high-frequency wirewound flyback topology transformers are ideally suited for 1.8 W low-power discontinuous mode isolated designs.
By Pulse Electronics 1821
Signal Transformer's Two-4-One™ power transformers use split bobbin construction which provides superior isolation and low capacitive coupling.
By Signal Transformer 1575
Signal Transformer's Split/Tran™ transformers provide superior isolation and low capacitive coupling and are built to meet Class 2 safety circuit standards.
By Signal Transformer 1599
Bourns' model SM13100EL and SM91074AL LAN 10/100 Base-T transformers and model SM91501AL and SM91502AL BMS signal transformers meet a variety of user needs.
By Bourns Inc. 929
Signal Transformer's More-4-Less™ M4L series international transformers provide more than 12 mm creepage distance between primary and secondary windings.
By Signal Transformer 1258
Wurth Electronics offline flyback transformers are available for both fixed-frequency and quasi-resonant operation mode.\r\n\r\n\r\n Würth Elektronik Midcom\r\n
By SL Power Electronics Manufacture of Condor/Ault Brands 1014
Bourns® SM453229-xx1N7Y Chip LAN transformers and common mode chip inductors are well-suited for use in a variety of telecommunication and network devices.
By Bourns Inc. 805
Signal Transformer's MPI transformers for improved performance over conventional 50 Hz/60 Hz transformers based on their design.
By Signal Transformer 1499
Signal Transformer's circuit mount power transformers have a wide operating frequency range of 50 Hz and 500 Hz without degradation of the output voltage.
By Signal Transformer 1672
Carlo Gavazzi’s A82/E83 series measure currents up to 500 AAC and provide AC or voltage outputs used to interface with monitoring relays or PLCs.
By Carlo Gavazzi 1524
Pulse’s high-isolation ethernet transformers have multiple options for working voltages, isolation voltages, and surge/impulse.
By Pulse Electronics Network 1392
Abracon’s LAN transformers are available in single and multiport devices.
By Abracon Corporation 1245
EPCOS' EP6 Platform narrows inductance tolerances, lowers inductance drift over temperature, and the high peak voltages enable this transformer to be used in ultrasonic park assist, industrial
By EPCOS 1172
Wurth Electronics, in partnership with Texas Instruments, developed a 10 kW 3-level, 3-phase grid tie inverter reference design for solar string inverters.
By Würth Elektronik 842
Wurth Electronics' WE-LAN transformers and WE-RJ45 LAN jacks provide magnetic solutions for industrial Ethernet communication from 100 BaseT to 10 Gb BaseT.
By Würth Elektronik 757