Texas Instruments' TUSB8041 is a four-port USB 3.0 hub, providing simultaneous SuperSpeed USB and high-speed/full-speed connections on the upstream port.
By Texas Instruments 741
Texas Instruments' TPS65263 incorporates triple synchronous buck converters with 4.5-18V wide input voltage range encompassing most intermediate bus voltage.
By Texas Instruments 913
Texas Instruments' UCC28880 lowest quiescent current off-line switcher for non-isolated AC/DC conversion, integrates controller and 700V power MOSFET into one.
By Texas Instruments 821
Texas Instruments' TPS82740 is the industry’s first 200 mA step-down MicroSiP™ converter module featuring typically 360 nA quiescent-current consumption.
By Texas Instruments 818
Texas Instruments' ADS7850 and ADS7250 are pin-compatible, dual, high-speed, simultaneous-sampling ADCs that operate over a wide power supply range.
By Texas Instruments 1321
Texas Instruments' TPS61232 device family is a high-efficiency synchronous step-up converter with a compact solution size, and the IC integrates a 5 A switch.
By Texas Instruments 650
DRV10866 3-phase sensorless motor drivers have low noise, reduce external component count, and protect against over current.
By Texas Instruments 901
Texas Instruments' UCC27528 is a dual 5A high-speed, low-side gate driver IC based on CMOS input logic threshold, and also features a dual input design.
By Texas Instruments 1346
TI's PCM1861 series have 8 analog inputs with MUX and PGA and up to 4x digital microphone inputs.
By Texas Instruments 850
LDC1051 series of inductance-to-digital converters offer a short-range, high-resolution, and low-cost sensing way to position the sensing of conductive targets.
By Texas Instruments 660
Texas Instruments' TLV320AIC3268 provides users with an integrated method to implement audio systems with multiple digital and analog audio streams as sources.
By Texas Instruments 918
Texas Instruments' bq27742-G1 delivers rate, temperature, and battery capacity values via the patented Impedance Track™ technology.
By Texas Instruments 889
TI's bq25071 accepts power from USB ports or AC adapters to charge single cell LiFePO4 batteries in handheld devices.
By Texas Instruments 891
Texas Instruments' TPS92075 is a hybrid power factor controller (PFC) with a built-in phase-dimming decoder. The device analyzes line cycles continuously.
By Texas Instruments 821
Texas Instruments' PCM5122/42 devices are a family of monolithic CMOS integrated circuits that include a stereo DAC and support circuitry in a TSSOP package.
By Texas Instruments 978
Texas Instruments' DRV8846 provides a highly-integrated stepper motor driver for cameras, printers, projectors, and other automated equipment applications.
By Texas Instruments 894
Texas Instruments' OPA1612 bipolar-input operational amplifier achieves very low 1.1nV/√Hz noise density with an ultra-low distortion of 0.000015% at 1kHz.
By Texas Instruments 777
The Texas Instruments' THS4541 is a low-power, voltage-feedback, FDA with an input common-mode range below the negative rail, and rail-to-rail output.
By Texas Instruments 860
Texas Instruments' TPS40425 is a PMBus, synchronous buck, driverless controller. The device operates in non-smart power mode in factory default setting.
By Texas Instruments 640
Texas Instruments' TPS6218x 4-15V, 6A, ultra-small, 2 identical current balanced phases, step-down DC-DC converters with AEE™ for low-profile power rails.
By Texas Instruments 951