Texas Instruments’ LM5175 buck-boost controller operates over a wide input voltage range of 3.5 V to 42 V (60 V maximum) to support a variety of applications.
By Texas Instruments 868
Texas Instruments’ 4.5V to 17V input, 2A, 3A synchronous step-down voltage regulator in SOT-23 with Advanced Eco-mode™ or Power-good and Soft-start.
By Texas Instruments 703
TI's DRV2700 device is a single-chip piezo driver with an integrated 105-V boost switch, integrated power diode, and integrated fully-differential amplifier.
By Texas Instruments 987
TI’s TPS706 series of linear voltage regulators are ultralow, quiescent current devices designed for power-sensitive applications.
By Texas Instruments 1947
TI’s TPS630250 are high efficiency, low quiescent current buck-boost converters for applications where the input voltage is higher or lower than the output.
By Texas Instruments 905
TI's MSP432P401R LaunchPad enables the development of high performance applications that benefit from low power operation.
By Texas Instruments 714
Texas Instruments’ ISO7841 device uses an ON-OFF keying (OOK) modulation scheme to transmit the digital data across a silicon-dioxide based isolation barrier.
By Texas Instruments 1060
Texas Instruments' LMH1218 is a low-power cable driver with integrated reclocker to drive serial video data.
By Texas Instruments 2149
Texas Instruments' ISO734xC provides galvanic isolation up to 3000 VRMS for 1 minute per UL and 4242 VPK per VDE.
By Texas Instruments 665
Texas Instruments' TPS3780 are high-accuracy, two-channel voltage detectors with low-power and small solution size.
By Texas Instruments 931
Texas Instruments' TPS82084 and TPS82085 devices are 2 A and 3 A step-down converter MicroSiP™ modules optimized for small solution size and high efficiency.
By Texas Instruments 675
TI's TPS544x25 DC-DC Converters with 4.5-18V, 20 and 30 A, SWIFT synchronous buck converters with PMBus and frequency synchronization.
By Texas Instruments 762
TI’s SM74104 high voltage gate driver is designed to drive both the high side and the low side N-Channel MOSFETs in a synchronous buck configuration.
By Texas Instruments 858
UCD3138A is a digital power supply controller from Texas Instruments offering superior levels of integration and performance in a single-chip solution.
By Texas Instruments 685
Texas Instruments' high resolution, low noise, 32-bit, 38 kSPS ADC with PGA and internal reference.
By Texas Instruments 700
Texas Instruments' ISO732x provide galvanic isolation up to 3000 VRMS for 1 minute per UL and 4242 VPK per VDE.
By Texas Instruments 806
Texas Instruments' 36 V low-/high-side bi-directional zero-drift current sense amp with precision internal shunt resistor.
By Texas Instruments 949
Texas Instruments' HD3SS460 is a high-speed bi-directional passive switch in mux or demux configurations.
By Texas Instruments 926
Texas Instruments' TPS54334 is a 28V, 3A, low quiescent supply current (Iq), synchronous monolithic buck converter with integrated MOSFETs.
By Texas Instruments 901
Texas instruments' MSP430FG6626 has five low-power modes, optimized to achieve extended battery life in portable measurement applications.
By Texas Instruments 773