Texas Instruments' LM3671 step-down DC-DC switching buck converters deliver a constant voltage from a single Li-Ion battery and input voltage rails.
By Texas Instruments 882
Texas Instruments' TPS51200 3 A sink/source DDR termination regulators are for low input voltage, low-cost, low-noise systems where space is a key consideration.
By Texas Instruments 646
Texas Instruments' LM5113 half-bridge gate drivers can operate up to several MHz, and are available in a standard WSON-10 pin WSON package and a 12-bump DSBGA package.
By Texas Instruments 706
Texas Instruments' CDCLVC11xx family of devices is a low-jitter and low-skew LVCMOS fan-out buffer solution.
By Texas Instruments 759
Texas Instruments' TUSB2046B 3.3 V CMOS hub device is suitable for self-powered USB hub product applications and is powered by an external 5 VDC power adapter.
By Texas Instruments 1638
Texas Instruments' LM386 are mono, low voltage power amplifiers with internal gain that can be used in a variety of applications.
By Texas Instruments 821
Texas Instruments' ADS124x devices are highly integrated 24-bit data converters for sensor measurement applications.
By Texas Instruments 955
Texas Instruments' INA180 amplifies the voltage developed across a current-sensing resistor as current flows through the resistor to the load or ground.
By Texas Instruments 798
Texas Instruments' LM2664 CMOS charge-pump voltage converters inverts a positive voltage in the range to a corresponding negative voltage.
By Texas Instruments 2277
Texas Instruments' INA226 is a digital current sense amplifier with an I²C- and SMBus-compatible interface.
By Texas Instruments 807
Texas Instruments' INA181 are bidirectional, 26 V, common-mode, current-sensing amplifiers used in both low-side and high-side configurations.
By Texas Instruments 1007
Texas Instruments' TPSM84A21/22 are 14 V, 10 A, synchronous series capacitor step-down (buck) power modules.
By Texas Instruments 924
Texas Instruments' bq2409x is a highly-integrated family of single cell Li-Ion and Li-Pol chargers and can be used to charge a battery, power a system, or both.
By Texas Instruments 795
Texas Instruments' MSP430FR596x family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals.
By Texas Instruments 818
Texas Instruments' TAS5782M integrates four main building blocks together into a single cohesive device that maximizes sound quality, flexibility, and ease-of-use.
By Texas Instruments 864
Texas Instruments' ISO7830 device is a high-performance, triple-channel digital isolator with 5.7 kVRMS isolation voltage.
By Texas Instruments 728
Texas Instruments' ADS8866 is a high-speed, successive approximation register (SAR), analog-to-digital converter (ADC) from a 16-bit product family.
By Texas Instruments 1159
Texas Instruments' LM5141 is a synchronous buck controller used to convert a higher input voltage to a lower output voltage.
By Texas Instruments 624
Texas Instruments' TPS61253A supports applications powered by Li-Ion batteries with extended voltage range with a wide input voltage range of 2.3 V to 5.5 V.
By Texas Instruments 656
Texas Instruments' DAC8775 16-bit quad-channel programmable current-output and voltage-output DAC is ideal for industrial control applications.
By Texas Instruments 848